Table 3-1 Post Dialing Service Codes - Single Digit Post Dialing Codes - NEC Univerge SV8100 Features And Specifications Manual

Issue 11.0
U
S 3
SING
ECTION
The manual assumes each extension has Automatic Handsfree. This lets a user just
press a line key or Speaker Key to answer or place a call. For extensions without
Automatic Handsfree, the user must:


Table 3-1 Post Dialing Service Codes – Single Digit Post Dialing Codes
Code
1 Handsfree Answerback / Forced intercom Ringing
2 Department Step Calling
3~5 Not used
6 Voice Over
7 Barge-In
8 Voice Mail
0 Message Waiting
# Call Waiting / Camp-On / Callback / Trunk Queuing
Off-Hook Signaling

3 - 2
H
ANDSFREE
Lift the handset or press Speaker for intercom dial tone.
Lift the handset or press Speaker, then press a line key for trunk dial tone.
For this feature. . . When you are. . .
Changing the signaling mode of your outgoing
Intercom call
Cycling to the next member of a Department Calling
Group
Sending a Voice Over to a busy extension after
hearing Busy/Ring tone
Barge into another station's active call
Leaving a message in a co-worker's mailbox after
calling their busy or unanswered extension
Leaving a Message Waiting at a co-worker's busy or
unanswered extension
Call Waiting / Camp-On / Callback / Trunk Queuing
Sending off-hook signal tones to a busy extension
UNIVERGE SV8100
Codes Tables