NEC Univerge SV8100 Features And Specifications Manual page 1964

Issue 11.0
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
You hear dial tone.

2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.

3. Dial 616 and the VRS password.
4. Dial the function you want.
7 = ecord
R
5 = isten
L
3 = rase
E
5. Dial the message number (01~100), record the message and press
If you dialed 7 to record, you can dial # to listen to the message you just recorded.

If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if you want to Record, listen

to or erase another message, go back to step 4.
General Message:
To listen to the General Message:
Multiline Terminal Only
Your Message Waiting LED flashes when there is a new General Message. A voice message
periodically reminds you.
1. Do not lift the handset or press Speaker.
2. Dial 4 ( eneral).
G
- OR -
1. Lift the handset and dial 611.
You hear the General Message.

Normally, your MW LED goes out. If it continues to flash, you have unanswered Message Waiting requests or

new messages in your Voice Mail mailbox.
To record, listen to or erase the General Message:
1. Press Speaker or lift the handset.
- OR -
At single line telephone, lift the handset.
2. Dial 612.
2 - 1932
UNIVERGE SV8100
to end recording.
#
Voice Response System (VRS)