Assembly Overview - Silencer With Mountings (Vehicles With Front Wheel Drive) - Volkswagen Golf Plus 2005 Service Manual

18 - 40 Nm
19 - Bracket
❑ Bolted to cylinder head
Installation position of clamp
– Position double clamp -a- = 5 mm from marking on front ex‐
haust pipe of particulate filter.
1.3 Assembly overview - silencer with mountings (vehicles with front wheel
drive)
1 - 25 Nm
❑ Renew
2 - Retaining ring
❑ Renew if damaged.
3 - Separating point
❑ Marked by indentation
on exhaust pipe
❑ During production, front
and rear silencers are
installed as a single
component. For repairs,
front and rear silencers
are supplied separately.
❑ The connection is made
with a clamp.
❑ Cutting exhaust pipe
⇒ page 190
❑ Installation position of
rear clamp (repair dou‐
ble clamp)
⇒ page 190 .
❑ Evenly tighten threaded
connections of clamp
(repair double clamp).
❑ Specified torques for
clamp (repair double
clamp): M8 = 25 Nm,
M10 = 40 Nm.
❑ Before tightening, align
cold exhaust system
free of tension
⇒ page 192
4 - Rear silencer
5 - Mounting
❑ Renew if damaged.
4-cylinder diesel engine (1.9 l engine) - Edition 01.2009
Golf 2004 ➤ , Golf Plus 2005 ➤
1. Exhaust system
189