Antenna Options; Location Of The Internal Antenna; Antenna Connection To Radio Module - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide

ANTENNA OPTIONS

For the majority of site installations the most convenient and cost effect choice are CNI2's with
the internal cellular antenna as seen in the illustration below. This is a five inch length
rectangular shaped circuit board (light blue color) that is mounted directly to the left inside wall
of the enclosure. Connection to the radio is via a short coaxial cable with an 'MMCX' type
connector on the end.

Location of the Internal Antenna

If it becomes necessary to disconnect the cable from the cellular radio, take care to firmly grasp
the metal end of the MMCX connector housing and pull straight out. Never pull directly on the
cable itself or bend the connector.

Antenna Connection to Radio Module

34