About Lithium-Ion Batteries; Tapping With A Stylus; Keypad Shortcuts - LXE MX3-CE Reference Manual

8

About Lithium-Ion Batteries

Li-Ion batteries (like all batteries) gradually lose their capacity over time (in a linear fashion) and
never just stop working. This is important to remember -- the MX3-CE is always 'on' even when
in the Suspend state and draws battery power at all times. Use the Start | Settings | Control Panel
| Power Properties | Charge tab to check the battery status and power reading.
The following chart is an approximation. Actual battery capacity may vary based on usage,
ambient temperature and peripherals drawing power from the MX3-CE:
Deciding when to put a fully charged Main Battery pack in the MX3-CE is difficult to quantify
because it is very application specific. 1000 mAh may be the cutoff for one customer who uses the
computer frequently, while 300 mAh may be perfectly fine for a customer who occasionally uses
the computer. You need to determine the point at which battery life becomes unacceptable for
your business practices and replace the Main Battery pack before that point.
Refer to the documentation received with the charger for complete information.

Tapping with a Stylus

Note:
Hold the stylus as if it were a pen or pencil. Touch an element on the screen with the tip of the
stylus then remove the stylus from the screen. Firmly press the stylus into the stylus holder on the
MX3-CE when the stylus is not in use.
Like using a mouse to left-click icons on a computer screen, using the stylus to tap icons on the
MX3-CE display is the basic action that can:
• Open applications
• Choose menu commands
• Select options in dialog boxes or drop-down boxes
• Drag the slider in a scroll bar
• Select text by dragging the stylus across the text
• Place the cursor in a text box prior to typing in data or retrieving data using the integrated
barcode scanner or an input/output device connected to the serial port.
An extra or replacement stylus can be ordered from LXE. See the section titled "Accessories" for
the stylus part number.

Keypad Shortcuts

Use keyboard shortcuts instead of the stylus.
• Press Tab and an Arrow key to select a file.
• Press Shift and an Arrow key to select several files.
• Once you've selected a file, press Alt then press Enter to open its Properties dialog.
• Press 2
• Right mouse click – press the Alt key and then tap the screen. Select a menu option.
• To force the Start menu to display, press Ctrl then press Esc.
MX3-CE Reference Guide
100% capacity 1800 mAh minimum
80% capacity 1440 mAh minimum
Always use the point of the stylus for tapping or making strokes on the display. Never use
an actual pen, pencil or sharp object to write on the touch screen.
nd
then press numeric dot to delete a file.
Getting Started
E-EQ-MX3CERG-G-ARC