Peap/Gtc - LXE MX7 Tecton CE Reference Manual

PEAP/GTC

PEAP/GTC
To use PEAP/GTC, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to PEAP-GTC
l
Set Encryption to WPA TKIP
l
Set Auth Type to Open
l
See Sign-On vs. Stored Credentials
Click the Credentials button.
No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for
l
the User Name and Password when connecting to the network.
Enter these items as directed below.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
PEAP/GTC Profile Configuration
for information on entering credentials.
PEAP/GTC Credentials
E-EQ-MX7CERG-A [ 267 ] MX7 Tecton™ CE Reference Guide