Peap/Mschap - LXE MX7 Tecton CE Reference Manual

PEAP/MSCHAP

Enter the password.
Click OK then click the Commit button. Ensure the correct Active Profile is selected on the
Main tab shows the device is associated after the radio connects to the network.
PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to PEAP-MSCHAP
l
Set Encryption to WPA TKIP
l
Set Auth Type to Open
l
See Sign-On vs. Stored Credentials
Click the Credentials button.
No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for
l
the User Name and Password when connecting to the network.
For Stored Credentials, User, Password and the CA Certificate Filename must be entered.
l
Enter these items as directed below.
PEAP/MSCHAP Profile Configuration
for information on entering credentials.
E-EQ-MX7CERG-A [ 264 ] MX7 Tecton™ CE Reference Guide
Main tab and warmboot. The SCU