Central Station Reporting; Ul Canada Listed Installations; California State Fire Marshall Listed Installations - GE Simon 60-875 Installation Instructions Manual

Opt. Function
#
N/A Duress/Panic Code
N/A Cross Zoning
Note
Before beginning installa-
tion, installers must verify
compatibility with the follow-
ing central station receivers.
Simon Security System
Programming Testing Page
Page Reference Reference
57
71
The following table describes non-programmable (hard coded) system operation as
required to meet ANSI-SIA CP-01 and is provided only for your reference.
Function
Silent Exit
Remote Arming Exit Time &
Progress Annunciation
Abort Annunciation
Cancel Report Annunciation
Recent Closing
Exit Error
Restoration of Power

Central Station Reporting

Note
The communication path between the panel and the receivers listed below can be either
DACT or internet. One is not a backup for the other.
The panel has been tested with the following central station receivers using SIA and
Contact ID reporting formats:
• Radionics D6600 Central Station Receiver
• Sur-Gard Central Station Receiver with models SG-DRL2A and SG-CPM2
• CS5000 Digital Alarm Communicator Receiver
• Osborne-Hoffman (OH2000E) Network Receiver

UL Canada Listed Installations

This section describes the requirements for CUL (UL Canada) Listed installations.
Canadian Standards CSA Certified Accessories
Residential Burglary Alarm System Unit (ORD-C1023-1974)
Basic system as described for "UL 1023 Listed Installations" plus:
• Hardwire Magnetic Contact (13-068 or 13-071) or Wireless Learn Mode Door/
Window Sensor (60-670)
• Option 39: Siren Timeout set to 5 minutes or more
Residential Fire Warning System Control Unit (ULC-S545-M89)
Basic system as described for "UL 985 Listed Installations" plus:
• Wireless Smoke Sensor 60-848-95 learned into sensor group 26
• Option 39: Siren Timeout set to 5 minutes or more
• For 24-hour backup, the total current draw for all connected devices is limited to
33 mA (during normal standby conditions) using a 1.2 AH battery.

California State Fire Marshall Listed Installations

Applied for.
Default
Setting
58 Disabled
58 Disabled
Operation
All annunciators enabled
All annunciators enabled
Enabled (2 minute window)
Panel resumes operation in same arming state
and disregards alarm signals from sensors for the
first 60 seconds after power restoration
Required Setting
Disabled
Enabled for PIRs
Enabled
Enabled
Enabled
3