Programming The Nx-535 Voice Module; Configuring The Control Panel For Voice Reporting; Recording Voice Messages - GE NX-10 Installation Manual

Programming the NX-535 voice module

Figure 16. NX-535 menu structure
Recording
11.1
Playback
11.2
Handshake Digit
11.3
Kiss Off Digit
11.4
Model
11.5
Version
11.6
Reset Settings
11.7
You must enrol and default the NX-535 voice module before you begin to program the system. To
program the NX-535, select Installer Menu>NX-535 Voice Module.

Configuring the control panel for voice reporting

You must enable event reporting in the control panel and program the zones types for which reports
are sent. You must also map each event to a recorded message. You can map one message to a
number of events.
Events can be reported to three phone numbers. Each phone number has it own account code,
protocol and events. You must program this information for phone number 1 at least. You can also
set number of dial attempts and a dialer delay for voice reporting.
Note: To allow a user to cancel reports and stop voice reporting by entering a user code, enable the abort all
function. This is useful in the case of a false alarm. Select Control Panel>System Settings>Feature
Select>Miscellaneous>All Abort>Enabled and press OK.

Recording voice messages

The NX-535 voice module can store up to 18 recorded voice messages. There must be one leader
message and one address message. There can be an optional kiss off message. The remaining 15
messages are event messages. The messages can be recorded altogether or one at a time. Some events
may be covered by one message. The following steps explain how to record different messages.
Connect a telephone handset to the phone jack on the NX-535 voice module.
1.
Navigate with the
2.
Leader Message
11.1.1
Single Event Message
11.1.3
11.1.5 Address Message
11.1.6 Kiss Off Message
Leader Message
11.2.1
Single Event Message
11.2.3
Address Message
11.2.5
Kiss Off Message
11.2.6
keys to NX-535 Voice Module>Recording and press OK.
NX-10 Expander Installation Guide
Message 1
11.1.3.1
Messages 2 - 15
Same as above
Message 1
11.2.3.1
Messages 2 - 15
Same as above
127