Table of Contents
Advertisement
System
Information
Viewing Event
Buffer
30
Arming and Disarming the Other Partition
Once in the other partition, you need to use a code that is valid in that partition to arm, disarm or
program that partition.
Programming the Other Partition
Only one partition can be programmed at a time. When one partition is using the programming
menu, touchpads in the other partition are locked out from any programming activity. Arming
and disarming can continue, however.
Some partition-specific settings share resources, such as access codes and time schedules. For
example, if Partition 1 uses Regular User numbers 00 through 20, Partition 2 will not be able to
see or use those user numbers. The first Regular User number available to Partition 2 would be
21.
The allocation of time schedules works in much the same manner. There are 16 schedules that
can be used by either partition, but as soon as Partition 1 attaches a schedule to any event, that
schedule cannot be used by Partition 2, and vice versa.
There is information about your system that is useful to know. This includes the factory code, the
system number, and the system level.
After identifying the information for your system, make a note of it in the "Appendix A: User
Sheets".
¾
To identify system information:
1. Enter the programming menus by pressing
010
2. Press
.
Š The first information displayed is the factory code. For example, "F nnn – nnnn," or "FAC-
TORY CODE nnn * nnnn."
Š Press
B
to display the system number. For example, "N – nnnnnnn," or "SYSTEM NUM-
BER nnnnnnn."
Š Press
B
to display the system level. For example, "L nnnn," or "SYSTEM LEVEL nnnn."
*
00
#
3. Press
+
+
to exit the programming menus.
You have the option to view the event history for each partition of your system. Events include
all system activity that has occurred on your system. These events include arming, disarming,
tampers, programming entries, just to name a few.
Overview
•
The installer, dealer and system master codes can view all events from any partition. The par-
tition masters can only view global system events and events related to their respective parti-
tion. Regular user codes cannot view event history.
•
All partitions can view event history simultaneously, but only one touchpad at a time can
view the history in each partition. While the event history is being viewed, all other control-
ling sources are disabled (except for panic alarm buttons) and non-viewing touchpads will
display "VIEWING EVENT BUFFER".
¾
To view event history:
1. The current partition must be armed to level 1 or 2.
2. At an alphanumeric touchpad, press 8 + System or Partition Master CODE + 8.
•
The touchpad displays "VIEWING EVENT BUFFER" followed by:
Event Description
Date/Time OR Details (user, source, zone, etc.)
•
The most recent event appears first.
•
Scroll through the events by pressing the A (back) and B (forward) keys.
9
+ System or Partition Master
CODE
.
Security Pro 7000
Advertisement
Table of Contents
