Replacing Angle- And Depth-Adjustable Foot; Plate; Replacing Foot Plate / Heel Strap Of Legrest - Invacare Mirage Service Manual

Invacare® Mirage
Replacing Nose Locking
• TX10 Torx key
1. Remove three screws C.
2. Pull nose D out off hanger E.
Replacing Hanger Lock (up to June 2015)
• 10 mm wrench (2x)
1. Counter nut K.
2. Loosen and remove bolt F including nut K, washer(s)
(H and J) and locking part G.
Replacing Hanger Lock (since July 2015)
• 4 mm Allen key
1. Loosen and remove screw including saddle washer and
locking part.
5.14.3 Replacing Angle- And Depth-Adjustable Foot Plate
• 5 mm Allen key
28
Fig. 5-34
Fig. 5-35
1. Remove screw (11) on foot plate (10).
2. Remove foot plate (10) from lower legrest tube. Take
care not to damage adjustment fixings (13).
3. Install parts in reverse order.
4. Test all functions.

5.14.4 Replacing Foot Plate / Heel Strap of Legrest

• 6 mm Allen key
• Phillips screwdriver, size 2
Removing Foot Plate / Heel Strap
1. Loosen and remove screw C, saddle washers B and
nut G.
2. Pull legrest A out of foot plate D.
3. Loosen and remove screw E including plastic bolt H.
4. Remove heel strap F.
Installing Foot Plate / Heel Strap
1. Install parts in reverse order.
Ensure that saddle washers B are in correct
position.
2. Test all functions.
Fig. 5-36
Fig. 5-37
1441763-E