8.2.4.3
Profile selection with remote REM 550
●
Plug the plug into the remote or the ACS II controller.
●
The display (2) shows that you need to select a profile.
●
Use the bottom rocker switch (3) to select where the required controller profile is saved.
I = remote
II = electronics module
●
The display will show which profile you have selected.
●
Press the "Horn" (4) and "+" (1) buttons on the speed selection and hold them down for 3
seconds to confirm the selection.
●
The system will switch itself off and restart automatically. During the process, the selected
profile will be saved both in the remote and in the electronics module.
46