Profile Selection With Remote Rem 550 - Invacare Storm4 Service Manual

®
Invacare - STORM
8.2.7.2

Profile selection with remote REM 550

·
Insert the plug into the remote or into the power module respectively.
·
Switch the remote on.
The display (2) shows that you need to select a profile.
·
Use the bottom rocker switch (3) to select where the required controller profile is saved.
I = remote
II = power module
The display shows which profile you have selected.
·
Press the "Horn" (4) and "+" (1) buttons on the speed selection and hold them down for 3
seconds to confirm the selection.
The system will switch itself off and restart automatically. In the process, the selected profile is
saved in the remote and in the power module.
4
SERVICE MANUAL
55