Operating The Scale; Function Of Keys; Scale Operating Menu; Accessing The Scale Operating Menu And Changing The Settings - Sartorius PMA7500 Service Manual

Anz-norm.TIF
Anz-rec.TIF
Vorein01.EPS
Vorein02.EPS
Important:
Vorein03.EPS
Vorein04.EPS

Operating the Scale

Function of Keys

On/off.
e
Tare / Zero key
=
Toggle.
w
v Funktion key
Clear function key, Used to interrupt/cancel functions, delete input.
c
Curser key
Y
Curser key
y
Recalculations key (start recalculation program)
Memory key

Scale Operating Menu

Accessing the Scale Operating Menu and Changing the Settings

– Press e to turn the scale off and press again to turn it back on.
– Press = briefly while all segments are lit (self-test).
– "1. 1. 1. 1. 1." is displayed.
You can configure software settings to block access to the scale operating
menu (menu code: 8 1 2). If menu access is blocked, this is indicated by a
minus sign preceding the menu code number (e.g., "- 1.
To make the menu accessible, select the menu code 8 1 1 (the only menu
code that can be selected when menu access is blocked). This setting can be
changed again the next time you activate the scale operating menu.
Selecting a Menu Code
– To select a certain menu code, press = to change the number of the
digit displayed to the desired code number. Numbers change in a
cyclical sequence, starting at 1 again after 9 is reached.
– To select the next digit (menu level), press w
– Once the first 2 digits are selected, the entire 3-digit code setting is
displayed, with a small superscript "o" indicating that this is the current
setting.
– Press w to return to the higher menu level
Changing a Menu Code Setting
– Once you have selected the desired code setting as described above,
press w for >2 seconds to confirm the setting.
– The superscript "o" is now displayed to indicate that this is the current
setting.
SARTORIUS PMA 7500...
The scale remains in the standby mode.
(display is set to 0,0 g)
Toggles the display between weight and
calculated value; also for changing Reference
sample quantity/reference percentage/ numbers
of subweighing operations.
(start application program)
up
down
(store values)
- 1." rather than "1. 1. 1. 1. 1.").
- 1. - 1. - 1.
5