Additional Functions (Balance Menu) - Sartorius la series Operating Instructions Manual

Additional Functions
(in the Balance Menu)
Password
You can block access to parameter
settings in the Setup menu and to
the ID code input function, as well as
to the exact calibration weight, by
assigning a password.
Enter the password under Setup:
Input. See "Configuring the
Balance" for a detailed description.
Protecting Menu Parameters
In the Setup menu, you can define
whether menu parameters are
– accessible for changes
(
Change parameters,
)
[8-1-1]
– can be read only (
Read
parameters, [8-1-2]
Acoustic Signal
An acoustic signal is emitted when
you press a key. When the key
pressed is allowed, the signal is
a single beep-tone; when it is not
allowed, this is signaled by a double-
beep (key does not initiate a function).
In the Setup menu, you can configure
whether
– the acoustic signal should sound
( , )
On [8-2-1]
– the acoustic signal should not
sound ( ,
Off [8-2-2]
Universal Switch for Remote Control
You can connect an external universal
switch to the interface port of your
balance (e.g., a foot switch) for
remote control of the functions listed
below. In the Setup menu, you
can configure which function is to
be controlled via remote switch:
– 1 ( ,
Print key [8-4-1]
– 2 ( ,
Tare key [8-4-2]
– 3 ( ,
Cal key [8-4-3]
– 4 (
F1 function key
[8-4-4]
– 5 (
CF key
– 6 (
F2 function key
[8-4-6]
– 7 (
Bar code scanner
PC keyboard [8-4-7]
special adapter necessary/
Order no. YCC01-0024M01)
"PC Keyboard" Functions
The alphanumeric key codes
implemented are for a German
keyboerd layout only ("Z" in the first
row instead of "Y", for example).
Some of alphanumeric keys are used
with the [Shift] key:
a–z, A–Z, 0 –9, space
„,.\+#<>!"$@%&/();=:_?*"
Function keys:
PC keyboard
F1
)
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
Return
Backspace
Up cursor
Left cursor
Down cursor
)
Right cursor
POS1 (HOME) Soft key 6
ESC
PRINT
The "Num Lock" and "Caps Lock"
keys are not supported. There is no
country-specific option for switching
these keys to a different function.
)
)
)
Operating the Balance
, Display Backlighting
)
You can have the display backlighted
, )
[8-4-5] for improved readability of displayed
values. In the Setup menu, you can
,
configure whether the
)
– display backlighting is on
,
– display backlighting shuts off
Power-On Mode
You can configure the balance
so that when a power supply
is connected,
– the balance is off
Balance
– the balance switches on
t key
M key
Soft key 6
You can also set the configurations so
Soft key 5
that when the balance is turned off
Soft key 4
after use, it is
Soft key 3
Soft key 2 – off (
Soft key 1
Display
Escape
– in the standby mode (
p key (print)
t key
Soft key 1
Escape
After you turn on the balance,
Soft key 3 a self-test of the functions is run
Soft key 4 (
TEST
Soft key 2 the bar graph is shown)
Soft key 1
After the self-test has been completed,
the weighing range of the balance is
Escape
displayed (line for metrological data
p key
shows different increments)
Automatic Shutoff
When parameter
– the balance shuts off automatically
– automatic shutoff is deactivated
( , )
On [8-5-1]
automatically after 4 minutes
without activity
(
Auto off after
4 minutes, [8-5-3]
(
Off/on/standby [8-6-1]
or )
Off/on [8-6-2]
automatically ( ,
Auto on
)
[8-6-4]
, ) (not
Off/on [8-6-2]
possible with balances that have a
weighing capacity ≥16 kg)
Off/on/
, )
standby [8-6-1]
is displayed in the text line;
is
[8-6-2]
selected in the Setup menu, you
can configure whether
after 4 minutes without use
( ,
After 4 minutes
)
[8-7-1]
( , )
Off [8-7-2]
)
111