Additional Functions; Beep Tone (Acoustic Signal); Universal Switch; Power-On Mode - Sartorius BA 210 S Installation And Operating Instructions Manual

Electronic analytical and precision balances
Table of Contents

Advertisement

Additional functions:

Beep Tone (Acoustic Signal)

If you desire, you can turn off the beep tone – also called an acoustic signal.
Acoustic signal
ON
OFF

Universal Switch

An external switch can be connected via the interface port – you can change the setting in the menu code to
alter the function of this switch
Funktionen
Print
Tare

Power-On Mode

Depending on the your operating requirements, you can change the power-on mode of your balance.
lf you define the code for "toggle between on and off," the balance power will remain turned off after a power
failure has occurred or after you have temporarily disconnected your balance from AC current. After the bal-
ance is turned off, power is not available for the "standby" mode. Use the ON/OFF key (16) to turn the bal-
ance on or off.
In the setting "toggle between on and standby", the balance power is turned on automatically after a power
failure has occurred or after you have disconnected your balance temporarily from AC power.
In the setting "automatic power-on," the balance will automatically turn on again after a power failure has
occurred, the balance has been disconnected from AC power, or after you have pressed the ON/OFF key
(16). In this setting, the balance can no longer be turned off by the ON/OFF key.
Power-on mode
(Power) off
on
on
(Power) off
on
standby
Automatic power-on
Automatic Shutoff (functions only if the menu code 8 6 2 is selected or if the balance is powered by the
rechargeable battery pack)
lf you operate the balance with a battery pack, set the menu code for the "Automatic Shutoff" function in or-
der to save energy and thereby increase the service life of the battery. lf the weight shown in the display
does not change for 2 minutes, the display will show "
off automatically.

Automatic Shutoff

ON
OFF
*
= factory setting, depends on balance model in some cases
24
standby
Code
8 2 1
*
8 2 2
Code
8 4 1
*
8 4 2
Code
8 6 1
*
8 6 2
8 6 3
8 6 4
". After another 2 minutes, the balance turns itself
Code
8 7 1
8 7 2
*
Changes
Changes
Changes
Changes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents