Intel 460GX Software Developer’s Manual page 28

Register Descriptions
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4:1
0
2.4.1.5 NERR_SAC: All Error Status Register
Bus CBN, Device Number: 00h
Address Offset:
Default Value:
Sticky:
This register records all error conditions detected in the SAC/SDC.
Bits
31:0
2-8
'Completion' Command Underflow; MAC B, Stack R (CCBR)
One of these 4 bits is set when the SAC receives a completion from the MAC and the
SAC has no outstanding transaction.
BERR# Observed (BER)
BERR# seen on the system bus. Set whenever BERR# is observed active.
IOQ Underflow/Overflow (IUE)
Set when the IOQ is empty and the SDC sends out a signal saying it popped something
from the top of the queue. Or set when the IOQ is 8 (or 1 when the IOQ depth is set to 1)
and an ADS# is seen on the bus.
reserved(0)
External XBINIT# Active. (XBE)
Set when XBINIT# is seen active. This signal is from an Expander port or other external
agent.
False Retirement (FRE)
Retirement from SDC that doesn't match an outstanding ITID in the SAC.
Address above TOM (TE)
Asserted when an address on the system bus is above TOM and not inside the I/O gap
below 4 GB.
Illegal HITM# (IHS)
HITM# on non-memory access.
Unsupported ASZ[1:0]# (ASE)
Processor access to an address above 64 GB, so that ASZ# = 10b or 11b.
System Bus Address Parity Error (AE)
Parity error on A[36:3]#.
System Bus Request Parity Error (RQE)
Parity error on REQ[4:0]#.
PDB ITID Parity Error (IPE)
Parity error on the ITID bus from SDC to SAC.
Retirement Bus Parity Error (RPE)
Parity error on the retirement bus from the SDC to the SAC.
Lock# Transaction With No Resources Available (LTE)
Set when a LOCK# transaction occurs and there are no outbound resources available in
which to place the lock.
reserved(0)
Resource Counter Overflow/Underflow (RCE)
Set if the resource counter has an underflow or overflow.
44h
000000h
Yes
Description
See FERR_SAC for bit definitions.
Function:
Size:
Attribute:
Locked:
Intel® 460GX Chipset Software Developer's Manual
1
32 bits
Read/Write Clear
No