Kirk Handset Registration; Registering Kirk Handsets - Polycom KIRK 300 Installation And Configuration Manual

KIRK Handset Registration

Note

Registering KIRK Handsets

Note
This section provides information about handset registration and
subscription. You must register and subscribe a handset before you can use it.
This section only describes how to register handsets on the KWS300. You
also need to register the users on the call handler. For registering users on
the call handler, refer to the call handler user guide.
When registering handsets you enter information about the handsets settings
(such as the handsets serial number (IPEI), name etc.) in the system database.
When subscribing handsets you subscribe a registered handset to the system
for usage. If the handset is not registered in the system database, subscription
of the handset is not possible.
To register handsets you use the web based Administration Page of the
KWS300.
The KWS300 does not provide any service to a handset whose serial
number is not registered in the web based Administration Page.
For more information about accessing the Administration Page, see
Access the Administration Page"
Click Users and then click List Users.
1
on page 4-1.
5
"How to
5–1