Restoring Default Settings - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR

13.5 Restoring Default Settings

Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
2. Click the OK button to restore the default settings.
Note:
Except the network parameters (including IP address, subnet mask, gateway, MTU, NIC working mode,
default route and server port) and the RAID enabling status, all other parameters of the device will be restored
to factory default settings.
Figure 13.14 Restore Factory Default
188