User Manual of DS-9664NI-RH Series NVR
Menu > HDD > RAID > Array
2.
Enter the Array interface to view the rebuilding status.
Note:
If there is no hot spare disk after rebuilding, it is recommended to install a HDD into the device and set
is as a hot spare disk to ensure the high security and reliability of the array. For detailed operation guide,
please refer to Step5 of Chapter 10.1.2.
10.2.2 Manually Rebuilding Array
You can also select the idle physical HDD for manual rebuilding of array when the system has detected HDD
exception or the array is in Degraded status.
Steps:
1.
Enter the Array interface.
Menu >HDD>RAID>Array
Figure 10.17 Array Settings Interface
Figure 10.18 Set Hot Spare Disk Interface
149