Starting Up And Shutting Down The Nvr - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR
No. Item
Keyboard
3 Termination Switch
4
USB Interfaces
5 VGA OUT
6 RS-232 Interface
7 HDMI
8 LAN1/LAN2 Interface
9 eSATA/USB
LINE IN
10
LINE OUT
11 MIC IN
12 GND
13 Dual Power Supply
Modules
Note: Single power supply module is provided by factory default configuration; and the dual power supply
modules are customizable.

1.6 Starting Up and Shutting Down the NVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
Check that the voltage of the extra power supply is the same with the NVR's requirement, and the ground
connection is working properly.
Starting up the NVR
Connect the power supply to the device, and the Power indicator LED on the front panel will light in green,
indicating the device has started up.
It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the
device.
Shutting down the NVR
Steps:
There are two proper ways to shut down the NVR. To shut down the NVR:
• OPTION 1: Standard shutdown
1. Enter the Shutdown menu.
Menu > Shutdown
Description
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the
first NVR's D+, D- pin should be connected with the D+, D- pin of the
next NVR.
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
VGA video output connector.
Connector for RS-232 devices.
HDMI video output connector.
Connector for LAN (Local Area Network).
Connects external SATA HDD, CD/DVD-RM or USB device.
3.5mm connector for two-way audio input.
3.5mm connector for audio output.
3.5mm connector for two-way audio input.
Grounding (needs to be connected when NVR starts up).
100 ~ 240VAC Input.
15