Restoring Default Settings - HIKVISION HWN-2100H Series User Manual

Click Upgrade to start upgrading.
After the upgrading is complete, reboot the NVR to activate the new firmware.

Restoring Default Settings

Go to Menu > Maintenance > Default.
Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address,
subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and
user account parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
Click the OK button to restore the default settings.
The device will reboot automatically after restoring to the default settings.
Network Video Recorder User Manual
Restore Defaults
137