Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
8.1 Setting up Motion Detection Alarm
Steps:
1.
Enter Motion Detection interface of Camera Management and choose a camera you want to set up
motion detection.
Menu> Camera> Motion
2.
Check the checkbox of Enable Motion Detection to enable motion detection.
3.
Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all
the area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
4.
Drag the sensitivity sliding bar to set the sensitivity level.
5.
Click the
icon of Handling to enter the Handling interface.
Figure 8.2 Set Trigger Camera of Motion Detection
6.
Click Trigger Channel tab to select IP channel (s).
1)
Select one or more channels which will start to record/capture or become full-screen monitoring
when motion alarm is triggered.
2)
Click Apply to save the settings.
7.
Click Arming Schedule tab to set arming schedule of the channel.
1)
Select Arming Schedule tab to set the channel's arming schedule for the motion detection.
Figure 8.1Motion Detection Setup Interface
112
Advertisement
Table of Contents
