Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
5.
Click the Apply button to save and exit the interface.
Note:
Before setting the SNMP, please download the SNMP software and manage to receive the device
information via SNMP port. By setting the Trap Address, the NVR is allowed to send the alarm event and
exception message to the surveillance center.
9.2.5 Configuring Remote Alarm Host
Purpose:
With a remote alarm host configured, the NVR will send the alarm event or exception message to the host
when an alarm is triggered. The remote alarm host must have the Network Video Surveillance software
installed.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the More Settings tab to enter the More Settings interface, as shown in Figure 9.16.
3.
Enter Alarm Host IP and Alarm Host Port in the text fields.
The Alarm Host IP refers to the IP address of the remote PC on which the Network Video
Surveillance Software (e.g., iVMS-4200) is installed, and the Alarm Host Port must be the same as
the alarm monitoring port configured in the software.
4.
Click the Apply button to save and exit the interface.
Figure 9.15 Configure SNMP Settings
Figure 9.16 More Settings Interface
Figure 9.17 Configure Alarm Host
131
Advertisement
Table of Contents
