Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
1)
Check the checkbox after the Enable Schedule item.
2)
Click Edit to enter the schedule edit interface.
3)
On the interface, you can choose the day to which you want to set schedule.
4)
Set the Type as Motion.
5)
To schedule an all-day recording, check the checkbox after the All Day item.
6)
To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Note:
Up to 8 periods can be configured for each day. And the time periods can't be overlapped
each other.
Repeat the above steps3)-6) to schedule motion detection triggered recording/capture for all the
week. If the schedule can also be set to other days, click Copy.
Figure 5.14 Record Schedule
Figure 5.15 Edit Schedule- All Day
51
Advertisement
Table of Contents
