Rebooting The Device; Restoring Default Settings - HIKVISION DeepinMind iDS-6700NXI Series User Manual

8.2.1 Rebooting the Device

Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance > Reboot.
Step 2 Click Reboot and the window pops up as below.
Step 3 Click OK to reboot the device or Cancel to cancel the operation.

8.2.2 Restoring Default Settings

Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance > Default.
Step 2 Click Restore or Default to restore device parameters.
 Restore: Restore the device to the default settings for the parameters except the IP
address, subnet mask, gateway and port.
 Default: Restore the device to the default settings for all parameters.
Step 3 On the pop-up message box, click OK to restore and reboot the device to validate the
settings.
DeepinMind Series NVS User Manual
Figure 8-3 Reboot the Device
Figure 8-4 Note
Figure 8-5 Restore Default Settings
Figure 8-6 Pop-up Message Box
77
iDS-67 00 Deep inMind Ser ies NVS User Manua l