Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
2.
Select the array from the list for rebuilding.
3.
Click
to enter the Rebuild Array interface.
4.
Select the physical disk for array rebuilding.
Note:
The physical disk selected for array rebuilding must have the same capacity with the failure disk.
5.
Click the OK button to start the array rebuilding.
6.
Return to the Array interface to view the rebuilding status under Task bar.
Figure 10.19 Degraded Array
Figure 10.20 Rebuild Array
Figure 10.21 Rebuild Array
150
Advertisement
Table of Contents
