Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
2.1 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2.1.
Operating the Setup Wizard:
1.
The Setup Wizard can walk you through some important settings of the NVR. If you don't want to
use the Setup Wizard at that moment, click the Cancel button. You can also choose to use the Setup
Wizard next time by leaving the "Start wizard when NVR starts?" checkbox checked.
2.
Click Next button on the Wizard window to enter the Login window, as shown in Figure 2.2.
3.
Enter the admin password. By default, the password is 12345.
4.
To change the admin password, check the New Admin Password checkbox. Enter the new password
and confirm the password in the given fields.
5.
Click the Next button to enter the date and time settings window, as shown in Figure 2.3.
Figure 2.1 Start Wizard Interface
Figure 2.2 Login Window
18
Advertisement
Table of Contents
