Restoring Default Settings - HIKVISION DS-7600NI-K1/W Series User Manual

14.6 Restoring Default Settings

Step 1 Enter the Default interface.
Menu > Maintenance > Default
Step 2 Select the restoring type from the following three options.
 Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
 Factory Defaults: Restore all parameters to the factory default settings.
 Restore to Inactive: Restore the device to the inactive status.
Step 3 Click the OK button to restore the default settings.
The device will reboot automatically after restoring to the default settings.
Network Video Recorder User Manual
Figure 14-9 Restore Defaults
190