Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
7.
If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and press Apply and OK to complete the settings of the alarm input.
Note:
Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols
and patterns are exclusive.
8.
If you want to set handling method of another alarm input, repeat the above steps or just copy the
above settings to it.
Figure 8.6 Set Arming Schedule of Alarm Input
Figure 8.7 Set PTZ Linking of Alarm Input
115
Advertisement
Table of Contents
