Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
1)
Find the record files you want to protect, and then click the
indicating that the file is locked.
Note:
The record files of which the recording is still not completed can't be locked.
2)
Click
Protect file by setting HDD property to Read-only
Steps:
1.
Enter HDD setting interface.
Menu> HDD
2.
Click
to edit the HDD you want to protect.
Note:
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter 10.4
Managing HDD Group.
3.
Set the HDD to Read-only.
4.
Click OK to save settings and back to the upper level menu.
Note:
You can't save any files in a Read-only HDD. If you want to save files in the HDD, change the
to change it to
to unlock the file and the file is not protected.
Figure 5.39 Unlocking Attention
Figure 5.40 HDD General
Figure 5.41 HDD General- Editing Property
65
icon which will turn to
,
Advertisement
Table of Contents
