Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
11.4 Managing HDD Group
11.4.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular
HDD group through HDD settings.
Steps:
1.
Enter the Storage Mode interface.
Menu > HDD > Advanced
2.
Set the Mode to Group, as shown in Figure 11.12.
3.
Click the Apply button and the following Attention box will pop up.
4.
Click the Yes button to reboot the device to activate the changes.
5.
After reboot of device, enter the HDD Information interface.
Menu > HDD> General
6.
Select HDD from the list and click the
in Figure 11.14.
Figure 11.12 Storage Mode Interface
Figure 11.13 Attention for Reboot
icon to enter the Local HDD Settings interface, as shown
165
Advertisement
Table of Contents
