User Manual of DS-9664NI-RH Series NVR
14.2 Configuring General Settings
Purpose:
You can configure the output resolution, date/time, LCD contrast, etc. through the Menu > Configuration >
General interface.
Steps:
1.
Enter the General Settings interface.
Menu >Configuration>General
2.
Select the General tab.
3.
Configure the following settings:
•
Language: The default language used is English.
•
Resolution: Select the video output resolution. The following resolution is selectable
depending on the monitor connected: 1920 × 1080P / 60Hz, 1600 × 1200 / 60Hz, 1280 × 1024
/ 60Hz, 1280 × 720 / 60Hz and 1024 × 768 / 60Hz.
•
Time Zone: Select the time zone.
•
Date Format: Select the date format.
•
System Date: Select the system date.
•
System Time: Select the system time.
•
LCD Contrast: Move the sliding bar to adjust the LCD contrast on the front panel.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable ID Authentication: Enable/disable the use of the login password.
4.
Click the Apply button to save the settings.
Figure 14.2 General Settings Interface
191