Operations In Live View Mode; Using The Mouse In Live View; Quick Setting Toolbar In Live View Mode - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR

3.2 Operations in Live View Mode

3.2.1 Using the Mouse in Live View

In live view mode, use the mouse to right-click on the window to access the following menu:
The functions are listed below.
•
Menu: Enter the main menu.
•
Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.
•
Multi-screen: Show multiple screens on the monitor simultaneously.
•
Previous Screen: Show the previous live view screen.
•
Next Screen: Show the next live view screen.
•
Start Auto-switch: The screen is auto switched to the next one.
Note: You must set the dwell time for each screen under Menu>Configuration>Live View>Dwell Time
menu before enabling the auto-switch.
•
All-day Playback: Play back the recorded videos for current day.

3.2.2 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse
in the corresponding screen.
Table 3.2 Description of Quick Setting Toolbar Icons
Icons Description
Start/Stop Manual
/
Record
Capture
Image Settings
Figure 3.1 Right-click Menu
Figure 3.2 Quick Setting Toolbar
Icons Description
Instant Playback
PTZ Control
Close the Toolbar
28
Icons Description
Mute/Audio on
/
Digital Zoom