User Manual of DS-9664NI-RH Series NVR
5.
Click the Apply button to save and exit the interface.
6.
After successful settings, the system asks you to reboot the device to enable the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE
connection. Please refer to Chapter 12.1Viewing System Information for PPPoE status.
9.2.2 Configuring DDNS
Purpose:
If your NVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be
used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the DDNS tab to enter the DDNS Settings interface, as shown in Figure 9.5.
3.
Check the DDNS checkbox to enable this feature.
4.
Select DDNS Type. Four different DDNS types are selectable: IPServer, DynDNS, PeanutHull,
NO-IP and hkDDNS.
•
IPServer: Enter Server Address for IPServer.
•
DynDNS:
Figure 9.4 PPPoE Settings Interface
Figure 9.5 DDNS Settings Interface
Figure 9.6 IP Server Settings Interface
127