Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
9.2.6 Configuring Multicast
Purpose:
The multicast can be configured to realize live view for more than 128 cameras through network.
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the
IP address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the More Settings tab to enter the More Settings interface, as shown in Figure 9.18.
3.
Set Multicast IP, as shown in Figure 9.18. When adding a device to the Network Video Surveillance
Software, the multicast address must be the same as the NVR's multicast IP.
4.
Click the Apply button to save and exit the interface.
Note:
The multicast function should be supported by the network switch to which the NVR is connected.
9.2.7 Configuring RTSP
Purpose:
The RTSP (Real Time Streaming Protocol) is
and communications systems to control streaming media servers.
Steps:
1.
Enter the Network Settings menu by clicking Menu >Configuration> Network.
2.
Select the More Settings tab to enter the More Settings menu, as shown in Figure 9.19.
3.
Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you
can change it according to different requirements.
4.
Click the Apply button to save and exit the menu.
Figure 9.18 Configure Multicast
a
network control protocol designed for use in entertainment
Figure 9.19 RTSP Settings Interface
132
Advertisement
Table of Contents
