Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
Figure 2.5 Enable RAID
8.
Click Next button to enter the array configuration interface.
Figure 2.6 Edit Array Name
Note:
When the One-touch Array Configuration is selected, the device can automatically enable
the installed HDDs for array creation. As the default array type is RAID 5, thus at least 3 hard
disks must be installed on the device.
9.
To initialize the HDD, click the Init button. Initialization will remove all the data saved in the HDD.
20
Advertisement
Table of Contents
