Checking Network Traffic - HIKVISION DS-9664NI-RH Series User Manual

Nvr
Table of Contents

Advertisement

User Manual of DS-9664NI-RH Series NVR
Receiver's Address: The Email address of user to be notified.
Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send
email with attached alarm images. The interval is the time of two adjacent alarm images. You can
also set SMTP port and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
E-mail Test: Sends a test message to verify that the SMTP server can be reached.
6.
Click the Apply button to save the Email settings.
7.
You can click the Test button to test whether your Email settings work. The corresponding Attention
message box will pop up. Refer to Figure 9.23.

9.3 Checking Network Traffic

Purpose:
You can check the network traffic to obtain real-time information of NVR such as linking status, MTU,
sending/receiving rate, etc.
Steps:
1.
Enter the Network Traffic interface.
Menu >Maintenance>Net Detect
2.
You can view the sending rate and receiving rate information on the interface. The traffic data is
refreshed every 1 second.
Figure 9.23 Email Testing Attention
Figure 9.24 Network Traffic Interface
135

Advertisement

Table of Contents
loading

Table of Contents