Front Panel - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR

1.1 Front Panel

The front panel of DS-9664NI-RH is shown in Figure 1.1.
No. Name
1 HDD Status
2 Power ON/OFF
3 LCD
Front Panel
4
Lock
POWER
ALARM
READY
ARCHIVE
5
STATUS
Tx/Rx 1
Tx/Rx 2
6 Backup
7 USB Interfaces
Figure 1.1 Front Panel
Table 1.1 Description of Control Panel Buttons
Function Description
HDD (1-16) indicator normally lights in blue when the HDD is connected; and it blinks
blue when data is being read from or written to HDD.
Power on/off switch. (Press and hold the button for 3 sec to shut down the device.)
Display the current system information.
Lock or unlock the panel.
Power indicator lights in green when the device is powered on and running; and it lights
in red when the device is standby.
Alarm indicator turns red when a sensor alarm is detected.
Ready indicator normally lights in green, indicating that the NVR is functioning
properly.
ARCHIVE indicator blinks in green when the device is backing up files.
Status indicator turns green when NVR is controlled by an IR remote.
Indicator turns orange when controlled by a keyboard and purple when IR remote and
keyboard is used at the same time.
Tx/Rx 1 indictor blinks green when network connection of LAN1 is functioning
properly.
Tx/Rx 2 indictor blinks green when network connection of LAN2 is functioning
properly.
Back up recorded video files.
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB
Hard Disk Drive (HDD).
10