Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
Steps:
1.
Enter the playback interface.
Menu>Playback
2.
Select Event tab to enter the Event Playback interface.
3.
Select Alarm Input or Motion as the event type. The following steps are introduced for motion
detection as the example.
4.
Click Search button to enter the Search Result interface.
The Pre-play and post-play can be configured. The Pre-play refers to the time configured before the
defined start time of event search, and the Post-play refers to the time configured after the defined
end time of event search. For example, when the start time and end time of event search are set to
12:00:00 - 13:00:00, and the pre-play and post-play time is set to 30s and 20s respectively, then the
actual playback of event video file is 11:59:30 ~ 13:00:20.
Figure 6.15 Video Search by Alarm Input
Figure 6.16 Video Search by Motion
76
Advertisement
Table of Contents
