Adjusting Live View Settings - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR

3.3 Adjusting Live View Settings

Purpose:
Live View settings can be customized according to different needs. You can configure the output interface,
dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
Configure the following settings:
•
Video Output Interface: The video output interface (VGA/HDMI) for parameters
configuration.
•
Live View Mode: Set the display mode to be used for Live View.
•
Dwell Time: The duration time in seconds between switching of channels when enabling
auto-switch in Live View.
•
Enable Audio Output: Enable/disable audio output for the selected video output interface.
•
Event Output: Set the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Set Camera Order.
To set the camera order:
1) Click View to enter the camera order settings interface.
Figure 3.4 Live View-General
Figure 3.5 Live View- Camera Order
30