Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
It is recommended to set hot spare disk for automatically rebuilding the array when the array is
abnormal.
2)
By default, one-touch configuration creates an array and a virtual disk.
5.
You can click Array tab to view the information of the successfully created array.
6.
Click Virtual Disk tab to view the automatically created virtual disk.
7.
You can view the virtual disk in the HDD Information interface (Menu>HDD>General). For
operation guide of initializing the virtual disk, please refer to Chapter 11.1 Initializing HDDs.
10.1.3 Creating an Array Manually
Purpose:
You can manually create the array of RAID 0, RAID 1, RAID 5 and RAID 10.
Note:
In this section, we take RAID 5 as an example to describe the manual configuration of array and virtual
disk.
Steps:
1.
Enter the Physical Disk interface.
Menu>HDD>RAID>Physical Disk
Figure 10.7 List of Created Array
Figure 10.8 Created Virtual Disk
144
Advertisement
Table of Contents
