Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
3.
Enter Record/Capture Schedule setting interface.
Menu> Record> Schedule
1)
Click Record/Capture Schedule
2)
Check the checkbox after the Enable Schedule.
3)
Click Edit.
4)
Set the Type to Alarm
5)
In the message box, you can choose the day to which you want to set schedule.
6)
To schedule an all-day recording, check the checkbox after the All Day item.
7)
To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Note:
Up to 8 periods can be configured for each day. And the time periods can't be
overlapped each other.
Repeat the above steps 4)-7) to schedule alarm triggered recording/capture for all the week.
Figure 5.22 Copy Alarm Input
Figure 5.23 Record Schedule
55
Advertisement
Table of Contents
