User Manual of DS-9664NI-RH Series NVR
9.4.3 Checking the Network Status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
1.
Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2.
Click the Network Detection tab to enter the Network Detection interface.
t
3.
Click
he Status button to get the network status.
If the network is normal, the following message box will pop up.
If the message box pops up with other information instead of this one, you can click Network button
to show the quick setting interface of the network parameters.
Figure 9.29 Network status checking
Figure 9.30 Network status checking result
Figure 9.31 Network parameters configuration
138