Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
10.4 Deleting Array/Virtual Disk
Note:
Before deleting the array, the virtual disk(s) existing under this array must be deleted first. Deleting
array and virtual disk will cause to delete all the data saved in the disk.
10.4.1 Deleting a Virtual Disk
Steps:
1.
Enter the Array interface.
Menu >HDD>RAID>Array
2.
Click the Virtual Disk tab to enter the Virtual Disk interface.
3.
Select the virtual disk from the list to be deleted.
4.
Click the
button to delete it.
5.
In the pop-up message box, click the Yes button to confirm the virtual disk deletion.
Note:
Deleting virtual disk will cause all the data saved in the disk to be deleted as well.
10.4.2 Deleting an Array
Note:
If all the virtual disks existing under an array have been deleted, then you can delete that array.
Steps:
1.
Enter the Array interface.
Menu >HDD>RAID>Array
Figure 10.25 Virtual Disk Interface
Figure 10.26 Confirm Virtual Disk Deletion
152
Advertisement
Table of Contents
