User Manual of DS-9664NI-RH Series NVR
8.2 Setting up Sensor Alarms
Purpose:
Set up handling method of an external sensor alarm.
Steps:
1.
Enter Alarm Settings of System Configuration.
Menu> Configuration> Alarm
2.
Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 8.4 Alarm Status Interface of System Configuration
3.
Check the Setting checkbox and click Handling button to set up its alarm response actions.
4.
Select Trigger Channel tab and select one or more channels which will start to record/capture or
become full-screen monitoring when an external alarm is input.
5.
Select Arming Schedule tab to set the channel's arming schedule.
Choose one day of a week and up to 8 time periods can be set within each day.
Note:
Time periods shall not be repeated or overlapped.
You can use Copy button to copy the same arming schedule to other days of a week.
6.
Click the
icon of Handling tab to set up alarm response actions of the alarm input (please refer to
Chapter 8.6).
Figure 8.5 Alarm Input Setup Interface
114