Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
4)
Click the Information of Array Capacity bar and repeat step2~step3 to create multiple virtual
disks.
Note:
It is recommended to create one virtual disk for an array. Up to 16 virtual disks can be created for
all arrays.
5)
Click OK to return to the array settings menu.
6)
Click the Virtual Disk tab to enter the Virtual Disk interface. The created virtual disks will be
listed on the interface.
4.
Initialize the virtual disk.
1)
After the foreground initialization of the virtual disk is complete, the virtual disk will be
displayed in the HDD Information interface.
Menu>HDD>General
2)
Select the disk from the list and click Init to initialize the virtual disk. When the initialization is
finished, the disk status changes from Uninitialized to Normal.
5.
Set the hot spare disk.
1)
Select the disk from the list for setting the hot spare.
Note:
It is recommended to use the same HDDs (including model and capacity) for setting hot spare
so as to maintain reliable and stable running of the disks.
2)
Click the
Figure 10.14 Virtual Disk Information
Figure 10.15 HDD Information
icon from the list to enter the Set Hot Spare interface.
147
Advertisement
Table of Contents
