Usb Mouse Operation - HIKVISION DS-9664NI-RH Series User Manual

User Manual of DS-9664NI-RH Series NVR
If the Status indicator on the front panel turns green, the remote control is operating properly. If the Status
indicator does not turn green and there is still no response from the remote, please check the following:
1. Batteries are installed correctly and the polarities of the batteries are not reversed.
2. Batteries are fresh and not out of charge.
3. IR receiver is not obstructed.
If the remote still can't function properly, please change a remote and try again, or contact the device
provider.

1.3 USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB
mouse:
1. Plug USB mouse into one of the USB interfaces on the front panel of the NVR.
2. The mouse should automatically be detected. If in a rare case that the mouse is not detected, the
possible reason may be that the two devices are not compatible, please refer to the recommended the
device list from your provider.
The operation of the mouse:
Name Action
Single-Click
Double-Click
Click and Drag
Left-Click
Right-Click Single-Click
Scroll-Wheel Scrolling up
Scrolling down
Table 1.3 Description of the Mouse Control
Description
Live view: Select channel and show the quick set menu.
Menu: Select and enter.
Live view: Switch between single-screen and multi-screen.
PTZ control: pan, tilt and zoom.
Tamper-proof, privacy mask and motion detection: Select target
area.
Digital zoom-in: Drag and select target area.
Live view: Drag channel/time bar.
Live view: Show menu.
Menu: Exit current menu to upper level menu.
Live view: Previous screen.
Menu: Previous item.
Live view: Next screen.
Menu: Next item.
13