Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
11.3 Managing eSATA
Purpose:
When there is an external eSATA device connected to NVR, you can configure eSATA for the use of
Record/Capture or Export, and you can manage the eSATA in the NVR.
Steps:
1.
Enter the Advanced Record Settings interface.
Menu >Record>Advanced
2.
Select the eSATA type to Export or Record/Capture from the dropdown list of eSATA.
Export: use the eSATA for backup. Refer to Backup using eSATA HDDs in Chapter 7.1.3 Backing
up by Normal Video Search for operating instructions.
Record/Capture: use the eSATA for record/capture. Refer to the following steps for operating
instructions.
3.
When the eSATA type is selected to Record/Capture, enter the HDD Information interface.
Menu > HDD>General
4.
Edit the property of the selected eSATA, or initialize it if required.
Note:
Two storage modes can be configured for the eSATA when it is used for Record/Capture.
Please refer to Chapter 11.4 and Chapter 11.5 for details.
Figure 11.10 Set eSATA Mode
Figure 11.11 Initialize Added NetHDD
164
Advertisement
Table of Contents
