Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only
has the local/remote playback in the Camera Configuration.
•
User's MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the NVR.
4.
Click the OK button to save the settings and go back to the User Management interface. The added
new user will be displayed on the list, as shown in Figure 14.7.
Figure 14.7 Added User Listed in User Management Interface
5.
Select the user from the list and then click the
shown in Figure 14.8.
6.
Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera Management: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown Reboot: Shutting down or rebooting the NVR.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the NVR.
Figure 14.8 User Permission Settings Interface
button to enter the Permission settings interface, as
194
Advertisement
Table of Contents
